That all sounds ideal, but it doesn’t make the weight room any less scary. To ease your fears, try changing your view on why you’re weight training and what it can do for you. As a runner, you’re training for strength, not to bulk up with massive muscle gains. And because of the amount of miles you’re putting in weekly, the chances that you’d achieve a large increase in muscle mass are pretty low.
In my business, (I work in a retail vitamin store), I get customers all the time who come in looking for the magic supplement that will pack on pounds of muscle overnight. When I begin to question their training, eating, etc., I discover they've been training maybe 3-4 weeks; they train every day (sometimes I get a guy who says twice a day), they have no clue about protein intake, calorie intake, recovery, and on top of all that, the routine they use is anything but logical for their experience level. This extremely common!
Training intensely is the key to stimulating muscle growth but don’t mistake volume for intensity. All too often, people trying to achieve a higher level of intensity in their training make the mistake of assuming that increasing volume and duration are effective methods of boosting training intensity. Let me make this perfectly clear. Volume and frequency have absolutely nothing to do with intensity! High volume training sessions can actually be counter-productive. So how do you effectively increase intensity? A. By progressively increasing the amount of weight that you use. B. By progressively decreasing the amount of time it takes you to perform a particular amount of work. (For example, I have made some of my best muscle gains from workouts that lasted no longer than 30 minutes.) C. By working your muscles at the capacity of nothing less than 100% on every set.
The third type of volume training program that's catching on rather rapidly is the FST-7 Training Program. This training program doesn't specifically lay out all the exercises you need to perform in a given session nor does it specifically state that you must divide the body up into a certain protocol (upper body and lower body or chest/back, legs and shoulder for example), but rather gives you guidelines as to what you should be doing on the last exercise for each body part worked that session.
Warmups are important to get blood flowing to heart, lung, and muscles and lubricating (synovial) fluid loosening the joints ready for action. Each weights exercise should include a warmup with light weights and practicing the same form as for the workout weight. Sixty percent of your workout weight is about right for warmups. Stretching is not so important before exercise and is better performed after exercise. Some light stretches will do no harm.
An article by Muscle & Fitness magazine, "Overtrain for Big Gains", claimed that overtraining for a brief period can be beneficial. Overtraining can be used advantageously, as when a bodybuilder is purposely overtrained for a brief period of time to super compensate during a regeneration phase. These are known as "shock micro-cycles" and were a key training technique used by Soviet athletes.[53]

Action: Once you feel comfortably balanced, contract your quadriceps and gluteal muscles and lower your body slowly. When you reach the point where your upper legs are just below parallel to the floor, push back up to the top without “locking out” and repeat the movement. Make sure to keep your abdominal muscles tight to protect your lower back, and keep your head up and your eyes fixed ahead as you perform this exercise.


The deadlift is performed by squatting down and lifting a weight off the floor with the hand until standing up straight again. Grips can be face down or opposing with one hand down and one hand up, to prevent dropping. Face up should not be used because this puts excess stress on the inner arms. This is a compound exercise that also involves the glutes, lower back, lats, trapezius (neck) and, to a lesser extent, the hamstrings and the calves. Lifting belts are often used to help support the lower back. The deadlift has two common variants, the Romanian deadlift and the straight-leg-deadlift. Each target the lower back, glutes and the hamstrings differently.
The first way is to do two exercises for the same muscle group at once (like in the Pre-Exhaustion technique). The drawback to this technique is that you will not be as strong as you usually are on the second exercise. The second and best way to superset is by pairing exercises of opposing muscle groups, antagonist groups, such as Chest & Back, Thighs & Hamstrings, Biceps & Triceps, Front Delts & Rear Delts, Upper Abs and Lower Abs. When pairing antagonistic exercises, there is no drop in strength whatsoever. As a matter of fact, sometimes our strength goes up due to the fact that the blood in the opposite muscle group helps you perform the other. For instance, if you superset dumbbell curls with triceps extensions, the blood in the biceps help you to do more weight in the triceps extensions.
Arnold used single-joint movements to complement overhead presses and isolate each delt head individually. Here, too, he sought subtle differences that would, over time, build better overall size. For example, the cable lateral raise in front of the body has a slightly different feel than when the cable runs behind you. Knowing how to do a given movement pattern on different pieces of equipment is, according to Arnold, essential for a bodybuilder to take his physique to the next level.
On January 16, 1904, the first large-scale bodybuilding competition in America took place at Madison Square Garden in New York City. The competition was promoted by Bernarr Macfadden, the father of physical culture and publisher of original bodybuilding magazines such as Health & Strength. The winner was Al Treloar, who was declared "The Most Perfectly Developed Man in the World".[5] Treloar won a $1,000 cash prize, a substantial sum at that time. Two weeks later, Thomas Edison made a film of Treloar's posing routine. Edison had also made two films of Sandow a few years before. Those were the first three motion pictures featuring a bodybuilder. In the early 20th century, Macfadden and Charles Atlas continued to promote bodybuilding across the world. Alois P. Swoboda was an early pioneer in America.
In step 3, cut back your energy intake by the 15 percent you added previously. Because you're now not the lean guy you once were, you may have to eventually eat slightly more to maintain that extra muscle, but that comes later. Bodybuilders do this to prepare themselves for competition: They put on muscle and some fat by eating, then they strip off the fat, leaving the muscle to show through. It’s called "cutting."
In the 1970s, bodybuilding had major publicity thanks to the appearance of Arnold Schwarzenegger, Franco Columbu, Lou Ferrigno, and others in the 1977 docudrama Pumping Iron. By this time, the IFBB dominated the competitive bodybuilding landscape and the Amateur Athletic Union (AAU) took a back seat. The National Physique Committee (NPC) was formed in 1981 by Jim Manion,[7] who had just stepped down as chairman of the AAU Physique Committee. The NPC has gone on to become the most successful bodybuilding organization in America and is the amateur division of the IFBB. The late 1980s and early 1990s saw the decline of AAU-sponsored bodybuilding contests. In 1999, the AAU voted to discontinue its bodybuilding events.
Many men who are on the path of building a better body ignore cardio or look at a cardio as purely assistance on a cut. Huge mistake. Cardio training is training of cardio vascular system. Goes perfectly into longevity mentioned above. Just check main causes of male mortality in your country and see which position cardio-vascular diseases take. Might as well hit that treadmill in order to enjoy your perfectly sculptured body for longer, gentlemen. 

Stretching after each lifting session is extremely important in preventing injury. Flexibility allows your body to become much more able to handle the odd assortment of stresses that are placed upon it each day. I'm sure that the more hardcore of us bodybuilding fans heard that Branch Warren recently slipped and fell, landing on his outstretched hand and tearing his triceps in the process.
Action: Start by leaning back slightly—this is the top position of the movement. Next, break your knees slowly and lower your body as far as you can without falling backward. If you feel like you’ve gone too far, you can use your supporting hand to pull yourself back up. Once you reach the bottom of the movement, push yourself back up to the top without “locking out” and repeat.
Stand with a micro bend in knees and feet slightly wider than shoulder-width apart. Grab dumbbells and hinge at hips so they hang in front of shins, palms facing you. Brace core and lift weights by squeezing glutes, thrusting hips forward, and pulling torso back and up. Focus on just hinging at the hips, not squatting. Repeat for 3 sets of 12 reps.
In the fourth and final week of the program, you’ll train four days in a four-way split that hits each bodypart just once (except for calves and abs, which are each trained twice). Four-day splits are common among experienced lifters because they involve training fewer bodyparts (typically 2–3) per workout, which gives each muscle group ample attention and allows you to train with higher volume. As you’ll see, chest and triceps are paired up, as are back with biceps and quads with hamstrings, each a very common pairing among novice and advanced bodybuilders. Shoulders are trained more or less on their own, and you’ll alternate hitting calves and abs—which respond well to being trained multiple times per week—every other workout. No new exercises are introduced in Week 4 so that you can focus on intensity in your workouts instead of learning new movements.
Muscles don’t grow unless they need to overcome a resistance, and, to a point, the harder you need to contract them, the greater the “mechanical tension” and resulting growth stimulus will be. It’s the ‘use it or lose it’ principle. The most effective way to do that? Grab a weight (or resistance band) and have at it. Research suggests that mechanical tension disturbs the integrity of a muscle, triggering a series of changes that ultimately results in increases in not only size, but also contractile strength and power. In general, the heavier weight you can lift with good form, the more tension you produce, and the more you’ll grow.

One new exercise is added to each bodypart routine to provide even more angles from which to train your target muscles to promote complete development. You’ll hit each muscle group with two exercises of 3­–4 sets each: four sets for large bodyparts (chest, back, shoulders, quads, hamstrings) and three sets for smaller bodyparts (biceps, triceps, abs, calves). The result is 16 total sets for the week for large bodyparts and 12 sets total for smaller ones—again, working in the 8–15-rep range—which is a substantial increase in volume from Week 1.

Train to muscular fatigue. Many people approach an exercise with a preconceived notion of the exact number of repetitions they will do for each set. (Ten seems to be a popular choice.) These misguided souls are training inefficiently and will never reach their full potential. When performing an exercise, your goal is not a certain number of repetitions. Do not start your set saying, "I'm going to do X number of reps." Depending on the muscle group and your particular athletic objectives, you will probably want to stay within a certain range of repetitions. However, your goal is to fatigue the muscle by performing each exercise (with good form) until you no longer can.
The best way to develop muscle strength is for the muscle to contract to its maximum potential at any given time – maximal voluntary contraction (MVC). In resistance training, MVC is measured by the term XRM, where RM is the maximum number of repetitions that can be completed with a given resistance or weight. X is the number of times a certain weight can be lifted before the muscle fatigues.
Identify specific muscles you hope to build. As you're posing, it's a good opportunity to check out your symmetry, your good gains, and identify places that you need to isolate or work out more vigorously for next week's training sessions. What needs to be smoothed out? What needs to be bulked up? What exercises will you need to do to get the results you want?
You can use your own body weight for resistance exercise. Pushups, sit-ups, chin-ups, squat thrusts, lunges, and step-ups are just some of the exercises that you can do to strengthen your body. The advantage of these exercises is that you can do most of them anywhere, and even though you can't change your body weight to increase or decrease the resistance, there are some things you can do to increase the resistance. Here are some suggestions.
Weight training aims to build muscle by prompting two different types of hypertrophy: sarcoplasmic and myofibrillar. Sarcoplasmic hypertrophy leads to larger muscles and so is favored by bodybuilders more than myofibrillar hypertrophy, which builds athletic strength. Sarcoplasmic hypertrophy is triggered by increasing repetitions, whereas myofibrillar hypertrophy is triggered by lifting heavier weight.[23] In either case, there is an increase in both size and strength of the muscles (compared to what happens if that same individual does not lift weights at all), however, the emphasis is different.
Try CHiKPRO™, a nutritious chicken protein isolate powder. Versatile and easy to use, this protein supplement should not cause water retention or bloating, making it perfect for those critical two weeks before a big competition. It contains a natural, beneficial balance of sodium and potassium. In addition, it is non-allergenic, dairy-free, and gluten-free. Visit our website to purchase products powered by CHiKPRO™.
Another important part of form is using a full range of motion while doing the exercise, meaning you do not stop your bench press half way down. If you cannot complete the full range of motion you are probably using too heavy of a weight. Your motion should also be slow and controlled, avoiding jerking the weights, swinging the weights to get momentum, or bouncing the weights.
A good pair of legs is as important to the body as a good set of wheels is to a car. But like a quality set of wheels, strong, healthy legs come at a high price. So, don’t take the following powerful exercises—especially the sissy squat—lightly. Because this is an incredibly intense workout that will turn your thighs into killer wheels. Serious focus and intensity are required.
Of all the macronutrients, protein is most important for cutting. While it will be carbs you miss the most, when cutting down calories, protein is important to build muscle which boosts your metabolism. Therefore, you’ll need to keep up your protein intake. Products such as Whey Protein Concentrate (WPC) allows you to consume a greater intake of protein without overdoing the calories, they are also available in tasty flavours than can curb any sweet cravings too.
At the end of the day, you have to focus on how you feel. “Listen to your body,” says Davis. “It tells you when it needs a day off.” As a rule of thumb, take a rest day if your perceived pain is above a seven on a scale of 10, Davis advises. Or, focus on a different body part (say, if your legs are sore, focus on upper-body moves). Can't stop, won't stop—at least, till your next rest day.
Compound exercises are the large-scale exercises which involve more than one large muscle group. Working with compound exercises results in extensive workload on two or more muscle groups and hence, growth in two areas instead of one, which is the case in isolation exercises. Exercises such as deadlifts, squats, bench presses, rows, and pull-downs are compound exercises. The added benefit of working out using compounds is that it saves the time of working on two areas of the body using two different exercises. Intensity and form are key in these workouts, and with the right practice, you will find gains in no time.
Attend local competitions. When you are just starting out, visiting local competitions will be helpful for a few reasons: you will be able to get a feel for competitions and what will be expected of you, you will be exposed to your potential competitors, and you will be able to speak with like-minded men and women who also enjoy the sport. You can make connections at a competition you might not be able to make at your local gym.

Focus on those exercises, trust me, you won't regret it. Also, don't be afraid to add weight to the bar as well, as long as your form is in check. Overloading the muscles is essential for growth because the body doesn't need to adapt if nothing's changing. Therefore, you must force your body to change by adding weight or another repetition on that exercise that next time it comes around.


The motor proteins actin and myosin generate the forces exerted by contracting muscles. Current recommendations suggest that bodybuilders should consume 25–30% of protein per total calorie intake to further their goal of maintaining and improving their body composition.[30] This is a widely debated topic, with many arguing that 1 gram of protein per pound of body weight per day is ideal, some suggesting that less is sufficient, while others recommending 1.5, 2, or more.[31] It is believed that protein needs to be consumed frequently throughout the day, especially during/after a workout, and before sleep.[32] There is also some debate concerning the best type of protein to take. Chicken, turkey, beef, pork, fish, eggs and dairy foods are high in protein, as are some nuts, seeds, beans, and lentils. Casein or whey are often used to supplement the diet with additional protein. Whey protein is the type of protein contained in many popular brands of protein supplements and is preferred by many bodybuilders because of its high Biological Value (BV) and quick absorption rates. Whey protein also has a bigger effect than casein on insulin levels, triggering about double the amount of insulin release.[33] That effect is somewhat overcome by combining casein and whey. Bodybuilders are usually thought to require protein with a higher BV than that of soy, which is additionally avoided due to its claimed estrogenic properties. Still, some nutrition experts believe that soy, flax seeds and many other plants that contain the weak estrogen-like compounds or phytoestrogens, can be used beneficially, as phytoestrogens compete with estrogens for receptor sites in the male body and can block its actions. This can also include some inhibition of pituitary functions while stimulating the P450 system (the system that eliminates hormones, drugs and metabolic waste product from the body) in the liver to more actively process and excrete excess estrogen.[34][35] Cortisol decreases amino acid uptake by muscle, and inhibits protein synthesis.[36]
Whilst this article will most certainly not be turned into a debate about the use of PEDS (Performance Enhancing Drugs) in bodybuilding, what we will be doing is clearing up the fact that not every single bodybuilder is using anabolic compounds to improve their physique, which is one of the reasons why there are a number of natural bodybuilding divisions were 100% natural bodybuilders compete clean.
You can't scroll through Instagram without clocking a mammoth cheat day feast, but are real-life bodybuilders consuming such a crazy amount of calories every couple of weeks? Not quite. When he’s dieting for a competition, Terry incorporates ‘re-feed days’ into his schedule. This means he eats the exact same food, but essentially doubles the portion sizes.
In contrast to strongman or powerlifting competitions, where physical strength is paramount, or to Olympic weightlifting, where the main point is equally split between strength and technique, bodybuilding competitions typically emphasize condition, size, and symmetry. Different organizations emphasize particular aspects of competition, and sometimes have different categories in which to compete.
Choose your favourite cardio exercises like spinning, outdoor biking, running, hill sprints, or swimming, whatever it is, hit it hard. Literally! Experts advise to perform HIIT, high-intensity interval training, to burn fat in a time-efficient manner. A 3-to-1 rest-to-work ratio is effective. It means you can, for example, go hard as you can on a hill sprint for 30 seconds, walk or jog back down the slope for 90 seconds, and repeat four times for an intense 10-minute training session.

Consume your essential fats: These fats are highly important for general health, muscle protection and for fat loss! A deficiency of these and not only energy levels will suffer but you will also encounter issues gaining muscle and losing fat. Two tablespoons of Flaxseed Oil with any meal or protein shake (except the post workout one as at this time we do not want the fats to slow down the absorption of the nutrients).


You may need to restock your pantry with lots of tuna and whole grains. Rivero shared details of her diet with SimplyShredded.com. A mini-meal may consist of oats and cooked egg whites; sweet potato and tuna; brown rice, chicken and greens; or tilapia and a quarter of an avocado. Figure competitor Ashley Toms, who describes diet as 90 percent of success in bodybuilding, similarly combines chicken, green veggies and steel-cut oats; whey protein shakes and oats; and snacks such as protein shakes or a handful of nuts.
The general strategy adopted by most present-day competitive bodybuilders is to make muscle gains for most of the year (known as the "off-season") and, approximately 12–14 weeks from competition, lose a maximum of body fat (referred to as "cutting") while preserving as much muscular mass as possible. The bulking phase entails remaining in a net positive energy balance (calorie surplus). The amount of a surplus in which a person remains is based on the person's goals, as a bigger surplus and longer bulking phase will create more fat tissue. The surplus of calories relative to one's energy balance will ensure that muscles remain in a state of anabolism.
Arnold wasn't just concerned with feeling the weight; he wanted to make sure the load induced muscle failure at a target range: "I make a point of never doing fewer than six repetitions per set with most movements," he notes," and nothing higher than 12. The rule applies to most body parts, including calves." Make sure to choose the right weight to fail within that rep range.
×